Application | Motor to automate a sliding gate / Electromechanical gearmotor for automatic gate and door automations with incorporated control unit, inclusive of radio receiver for ECCO5 transmitters (various models) |
Kit includes | 1x24V operator, manual release keys, 2 remote controls in basic kit / plus 1 pair of PH200 hard wired safety beams in Pro kit, manual release key |
Operator case | Grey heavy duty plastic |
Motor Voltage (V) | 24V (motor has an inbuilt transformer) |
Motor Power Supply (Watts) | 370W |
Typical Gate Opening Time/Speed | 0.30 m/s |
Openings Per Hour | 24 cycles/hour at 55°C (40 at 25°C) |
Maximum continuous cycle time | 30 minutes |
Protection Degree | IP44 |
Manufacturer Rating Gate Weight / Width | Filo 400 5.5m long / 400kg, Filo 600 7m maximum length / 600kg maximum weight |
Motor Dimensions | 248x216x305mm |
Working Temperature oC | -20°C … +55°C |
Motor Weight (KG) | 7.5KG |
Boxed Measurements | 330x230x250mm |
Boxed Weight of motor kit | Filo 400 10 / Filo 600 12kg |
Remote Control Technical Information | Using ECCO5… transmitters, the control unit is able to receive one or more of the following commands: Step-by-Step (SbS) – Partial Open – Open Only – Close Only / From 50 to 100 m. This range can vary if there are obstacles or electromagnetic disturbances and is also affected by the position of the receiving aerial incorporated in the flashing light |
Control Board Technical Information | A 24 V motor, reducer with helical gears; mechanical release mechanism. A transformer inside the motor, but separate from the control unit, reduces the mains voltage to the nominal 24 V voltage used throughout the automation system |
Country of Manufacture | Italy |
Warranty | 12 months when installed and maintained as per manufacturers instructions |
Other Specifications | Accessories require 24V / Configured for model PR100 back-up batteries |
Servicing | Recommended every 12-18 months depending on useage |
Batteries sold separately.
Remote controls include battery.