Description
It is powered by a 24 volt transformer and can move 3-500 kg in weight and 4.2 meter in length. The Modus Articulated arm kit is the ideal choice to be fitted on new or existing gates due to the wide range of positional adjustment. The system is very easy to programme thanks to its automatic programme function. The Modus boasts many innovative features, including a slow-down facility on opening and closing, obstacle detection to ensure safety, secondary safety input for additional photo cells or safety edges, and has partial opening for pedestrian use. The benefit of a low voltage system is the capacity for high use and the opportunity for battery backup in case of power cuts.
Note: When using the raising hinge arm/ and /or solar power – the max specifications of the gate – weight, length and speed – is reduced by 30%
Application |
Bolt on automated motors with articulated arms |
Material and coating/colour |
Die cast aluminium case |
Motor Voltage (V) |
24V off 230V mains |
Motor Power Supply (Watts) |
30W |
Protection Degree / Rating IP |
IP44 |
Manufacturer Rating Gate Weight / Width Load |
Mini 250kg and 2m / XL 300kg and 4m per leaf |
Motor Dimensions |
165x250x306mm |
Working Temperature oC |
|
Motor Weight KG per unit |
Mini Modus Single 9.52kg / XL Single 12.24kg |
Boxed Measurements |
800x170x300mm |
Boxed Weight of kit |
Single operator 15kg / Twin operators 20kg |
Kit Includes |
Single operator 1x24V unit with articulated arm, 2 remote controls, manual release key, controller and receiver / Double operator 2x24V motors with articulated arms, 2 Stylo remote controls, manual release key, controller and receiver, wall plates |
Remote Control Technical Information |
Four channel rolling code 433.92 MHz radio remote control |
Control Board Technical Information |
Starg824 |
Country of Manufacture |
Italy |
Warranty |
Manufacturer warranty 3 years subject to regular servicing and install as per manufacturer |
Gate set up on pillars:
This motor is best when installed between brick or reconstituted limestone pillars, or minimum 100x100x5mm steel posts.
This motor is an articulated (folding) arm setup. This setup is for gates opening inwards. It can be modified to swing outwards with brackets sold separately.
The Modus is equipped with:
- adjustable stoppers on full opening and closing points
- manual release key for emergency opening the gate by hand
- power cord, ready to plug into power point